The Trelleborg 575 Anger seal is a combined lip and compression seal. The seal is positioned in the socket by the pipe manufacturer.
The ”main lip” comprises a combined lip and compression section. The ”front and rear lip” locates the seal in the socket groove and absorbs any permissible variations in the groove.
The Trelleborg 575 Anger seal meets or exceeds current European standards for both pressure and vacuum, deflection and shear load. Furthermore, the seal design gives low assembly forces making pipe jointing.
Key features & benefits
- Low jointing force for easy installation
- Minimize risk of seal displacement
- High performance – low cost solution
| PIPE SIZE (mm) | A (mm) | B (mm) |
|---|---|---|
| 63 | 10.4 | 17.7 |
| 75 | 11.6 | 19.6 |
| 90 | 12.7 | 21.5 |
| 110 | 13.8 | 23.4 |
| 125 | 13.8 | 23.4 |
| 140 | 14.8 | 25.1 |
| 160 | 15.9 | 27.0 |
| 200 | 16.9 | 28.7 |
| 225 | 18.0 | 30.6 |
| 250 | 19.9 | 33.8 |
| 280 | 21.2 | 36.0 |
| 315 | 22.2 | 37.7 |
| 400 | 28.0 | 44.8 |
| 500 | 32.2 | 51.5 |
Dimensions & Designation
On each seal, profile, diameter and appropriate pipe dimensions together with date of manufacture is given. The corresponding information is also included on the packaging.
Subject to change for technical reasons.
Apply lubricant to the spigot end and immediately bring it into contact with the socket.
Align spigot and socket, and slide the spigot into the pipe, past the seal.
