Seal design & function
Trelleborg 607 PIP-Lock is a composite seal consisting of a flexible TPV element and a polypropylene reinforcement element, bonded to the TPV, which holds the seal firmly in place.
The seal becomes part of the socket forming tool used to shape its own seal groove. This reduces irregularities and tolerances in the socket, increases installation reliability and minimizes the risk of seal displacement during pipe installation.
Trelleborg 607 PIP-Lock seal meets or exceeds current American standards for wastewater lines both for indoor and underground.
Key features & benefits
- Greater joint reliability due to joint tolerance reduction
- Cannot be displaced or lost during stocking, transportation and installation
- Simplified tooling and maintenance
Material
- EPDM rubber
- PP reinforced retaining ring
- Ozone resistant
| PIPE SIZE (Inch) | A (Inch) | B (Inch) |
|---|---|---|
|
6 |
0.40 | 0.96 |
| 8 | 0.44 | 1.06 |
| 10 | 0.54 | 1.28 |
| 12 | 0.58 | 1.38 |
Dimensions & Designation
On each seal, profile, diameter and appropriate pipe dimensions together with date of manufacture is given. The corresponding information is also included on the packaging.
Subject to change for technical reasons.
Inspect the spigot, socket and seal for damage and remove any dirt or dust prior to assembly. Chamfer the spigot end and remove all burrs.
Apply lubricant to the spigot end and immediately bring it into contact with the socket.
Align spigot and socket, and slide the spigot into the pipe, past the seal.
