Trelleborg 140 Lamell is a pre-lubricated sliding seal that is stretched onto the spigot of the pipe or manhole. Additional lubricate is not required for joint assembly.
It is designed so that the pre-lubricated mantle rolls onto the top of the spigot shoulder and into the gap between spigot and socket during installation. This prevents concrete to concrete contact and gives efficient transverse shear load distribution across the joint.
The rectangular cross section of the laminated sealing body makes the seal very flexible and provides excellent contact width. It is easy and clean to handle as the lubricant is enclosed in the sliding mantle. This allows installation with very little force as there is no friction between the rubber and concrete. Joint performance is dependent on dimensional accuracy and surface finish of socket and spigot.
Trelleborg 140 Lamell meets all relevant current European standards.
Key features & benefits
- Very flexible, provides excellent contact width
- Easy installation, no friction between rubber & concrete
- Large contact width bridges minor surface imperfections
Material
- Synthetic SBR or EPDM rubber - Hardness 40±5 IRHD
- Approved in accordance with EN 681-1
- Protected against ozone, oil resistant grades are available on request
| A (mm) | B (mm) | C (mm) |
|---|---|---|
| 13.5 | 17.5 | 2.7 |
| 16.5 | 24.0 | 2.5 |
| 18.5 | 26.0 | 3.3 |
| 20.0 | 28.0 | 2.8 |
| 22.5 | 30.0 | 3.2 |
| 24.5 | 32.0 | 3.5 |
| 28.0 | 35.0 | 5.0 |
| 32.0 | 40.0 | 5.2 |
Dimensions & Designation
On each seal, profile, diameter and appropriate pipe dimensions together with date of manufacture is given. The corresponding information is also included on the packaging.
Subject to change for technical reasons.
Stretch the seal onto the spigot and position against the shoulder.
Centre the joint and assemble.
