Emergency Oxygen Systems
In the event of cabin depressurization, oxygen systems provide emergency oxygen to passengers and crew. Designed to store and generate a supply of pure oxygen and to regulate and dilute as required, they distribute oxygen throughout the cabin and cockpit. Conforming to industry requirements outlined in the Federal Aviation Administration (FAA) Title 14 Code of Federal Regulations (CFR), Part 25, Trelleborg products ensure the flow of and access to oxygen throughout the aircraft.

Static Seals
![]() |
Static seals prevent leakage throughout the oxygen system. Specified to meet your unique requirements, solutions range from multifunctional O-Rings to seals with more complex geometries, including custom-molded designs and bonded products.
Liquid Silicone Rubber (LSR) Components
![]() |
LSR molding technology allows breathing masks to fit facial contours and cover the airways of the nose and mouth, providing oxygen to passengers in the event of an emergency.
Engineered Molded Thermoplastic Components
![]() |
In compliance with fire testing requirements, including FAR 25.853, engineered molded thermoplastic components are available in a wide range of geometries. Within the passenger service unit (PSU), they form air nozzles and panel support bracket components.
Thermoplastic & Elastomer Clamps
![]() |
Thermoplastic clamps attach and guide tubing components for optimal storage and easy access. Manufactured to custom specifications, Trelleborg clamp blocks hold pipes and wires in place to minimize vibration.
Tubing & Hose
![]() |
Tubing and hose products for aircraft oxygen systems made from silicone, PTFE, and PVC and multiple layers.
Mask Regulators
![]() |
Trelleborg custom-molded components ensure a constant flow of oxygen in critical situations.
Water & Wastewater Systems
Water and wastewater systems provide galleys and lavatories with clean water and ensure efficient removal of waste. Seals perform numerous critical functions in the areas of potable water and sanitation on the aircraft, from conserving and regulating the flow of water to preventing contamination or leakage.

Custom-Molded Components
![]() |
Advanced design and tooling technology creates lightweight, custom-molded components for a range of uses, including heating technology, fittings, faucets, and sensors. Custom-Molded Components can also be found in galleys.
Diaphragms
![]() |
Diaphragms for use in faucets and flow sensors are available in a wide range of shapes, sizes and materials, designed to meet application requirements. Multicomponent technology, can be utilized, to create one-piece plastic- or metal-to-rubber bonded parts. Diaphragms can also be found in lavatories.
Drain Couplings & Adaptors
![]() |
Using advanced thermoplastic technology, Trelleborg custom-designs and manufactures a wide range of drain couplings and adaptors found in valves, faucets, and housing adaptors.
Gaskets
![]() |
Typically used to prevent leakage of two joined pieces in waste tanks, potable water tanks, drain masts and fittings, gaskets are designed and manufactured to meet customer specifications.
O-Rings
![]() |
O-Rings are in fittings, valves, faucets, sensors, water heaters and water filters. They are available in EPDM, FKM, NBR, HNBR, and our proprietary FFKM, Isolast®, to supply water without leakage to lavatories and galley equipment. O-Rings can also be found in galleys and lavatories.
LSR Components
![]() |
Advanced injection-molding techniques, including micro-size, delicate part and thin section capabilities, produce high-precision LSR parts for faucets and water flow distribution. LSR Components can also be found in lavatories.
Hoses & Tubing
![]() |
Hoses and tubing for water distribution and drainage are available in a wide range of materials, including silicone and PTFE, and can be composed of multiple layers when the application requires chemical compatibility and high strength.
Bleed Air Systems
Bleed air systems operate in the aircraft’s high-temperature zones, and so reliable performance for the lifetime of the aircraft is vital. Trelleborg sealing products prevent bleed air leakage throughout the system, improving engine efficiency and fuel consumption.

Diaphragms
![]() |
We have extensive experience manufacturing elastomeric diaphragms both with and without fabric reinforcement. Inserts can be used to eliminate secondary operations. Diaphragms can also be found in engines.
Ducting Seals
![]() |
Seals in the ducting guide hot bleed air from the aircraft’s engines or APU toward the anti-ice and ECS. Trelleborg’s Turcon® Variseal® solutions are available in standard geometries and as ‘trombone’ ducting. Ducting Seals can also be found in engines.
Hot Air Fire Seals
![]() |
Usually manufactured from fabric-reinforced silicone to accommodate movement in all directions and located between rigid ducts of various shapes, fire seals, including duct seals and kiss seals, require stringent fire testing. Hot Air Fire Seals can also be found in engines.
Plate Seals & Gaskets
![]() |
Gaskets and plate seals within the engine bleed air system reduce leakage, withstand elevated temperatures and high vibration. These seals typically consist of two components joined together, for example, in motors and gearboxes, ducts, manifolds, engines and auxiliary power units (APUs).
Routing & Clipping
![]() |
To protect and guide bleed air, ducting incorporating thermoplastic components including P-Clamps and Band Clamps to prevent damage due to abrasion and vibration.
Bleed Air Systems
![]() |
Trelleborg manufactures seals for air valves for use within the bleed and cabin air stream. These high-quality products operate continuously at temperatures up to +260 °C /+500 °F. In ball, butterfly, regulating and high-pressure valves, they provide consistent low friction performance to meet opening and closing requirements.
Air Conditioning Systems
An aircraft’s environmental control and conditioning system provides a clean and constant airflow to the cabin and crew throughout the flight and during ground maneuvers. Trelleborg products seal critical components, reduce system weight and increase the efficiency of the system.

Composite Structures
![]() |
Manufactured from resins and carrier materials, custom lightweight composite structures are suitable for use in plenums, ducts and resonators.
Air conditioning systems
![]() |
Elastomer static seals, manufactured in a wide range of materials, including EPDM, FKM, NBR, HNBR and our proprietary FFKM, Isolast®, are suitable for HEPA filters, access door seals and valves. As well as offering a standard range of seals, we also design and manufacture custom components in non-standard shapes and sizes.
Turcon® Seals & Components
![]() |
Operating in a wide range of temperatures and demonstrating high chemical resistance, Turcon® PTFE material is also non-toxic and has high fungal resistance, making it ideal for seals and components in the ACS. Turcon® is used in Variseal® sping-energized seals, Varilip® lip seals and custom designs, such as valve seats and diaphragms.
Turcon® Spring-Energized Seals
![]() |
Suitable for use in hot air ducting and pipes, Turcon® spring-energized seals can operate in applications with temperatures up to +300°C / +572°F. These seals prevent air from escaping the bleed air ducts used, for example, in bleed valves, anti-icing systems and air conditioning systems. We can supply seals qualified to several Airbus ABS specifications. for use in plenums, ducts and resonators.
Cabin Pressurization Systems
A safe and comfortable environment for the pilots, crew, and passengers at high altitudes results from the pressurization and control of air in the aircraft. Trelleborg manufactures interior and exterior components to guide and minimize the loss of air from the ECS into the cabin, and from the cabin to the outside of the aircraft, thereby maintaining constant cabin air pressure.

Cabin Air Outlets
![]() |
Manufactured in lightweight materials, individual air outlets are compliant to fire testing requirements (including FAR 25.853) and offer easy and precise adjustment, to control the flow of ambient air. To enhance aesthetics, they are color matched to the cabin interior style of the airline. Cabin Pressurization Systems.
Clamps
![]() |
Designed to connect and route components throughout the aircrafts ACS and cabin pressurization systems. Clamps come in a variety of sizes and materials, including all metal, elastomer and metal, and thermoplastic. Band clamps are available for routing larger ducting systems, while various cushion type clamps are available to route, support, and minimize vibration within flexible hosing and tubing.
Custom-Molded Components
![]() |
Customer specific custom-molded thermoplastics, used in air nozzles, support brackets, air grills, vents and other air delivery components, comply with fire testing requirements (including FAR 25.853). Components can be color matched to meet aircraft interior design requirements.
Flexible Ducting
![]() |
Customer specific hosing, ducting, flexible coupling, and routing components guide lowpressure cool air from the ECS to pressurize the cabin.
Static & Dynamic Seals
![]() |
In outflow air valves, static and dynamic seals, ranging from multifunctional O-Rings to components with more complex geometries, help maintain constant aircraft cabin pressure throughout the duration of a flight.