Success Stories

Gas Intensifier Cylinder
New Development: New development for our customers also. The main challenge was to keep separate CNG gas & hydraulic oil in three different chambers in one cylinder
Products offered: Piston AQ5, Piston Stepseal 2K, Slydrings (T47 & T51), Rod Stepseal 2K (M12N), Rod AQ seal with bean seal (M12N), Piston Glydring T (in T10N)
Solutions: New development & successfully validated at end customer, Desired gas pressure achieved at the exit port
Products offered: Piston AQ5, Piston Stepseal 2K, Slydrings (T47 & T51), Rod Stepseal 2K (M12N), Rod AQ seal with bean seal (M12N), Piston Glydring T (in T10N)
Solutions: New development & successfully validated at end customer, Desired gas pressure achieved at the exit port
Chip Compactor Cylinder
Application: Chip Compactor Cylinder used for making metal cakes compressing waste metal chips
New Development: New development for us. Earlier used seals (from another supplier) couldn’t hold load (as the rod is vertically downwards) & it’s high-temperature application
Products offered: Double lip PU wiper, Rod AQ seal (with bean seal), Rod Stepseal 2A (Anti-tilt seal), Slydrings, Piston Glydring T
Solutions: Successfully validated at our customer
Tyre Curing Press
New Development: New development for us.
Earlier competitor rod seals were used, which showed leakage & high friction.
The earlier supplier did the wrong design not considering low pressure.
The customer wanted a leak-proof seal even at very low pressure (around 1 bar).
We have given PTFE Multiple lip rod seal (one seal).
One working cycle includes four working media i.e. Steam, hot water, cold water, Nitrogen with varying pressure & temperature
Earlier competitor rod seals were used, which showed leakage & high friction.
The earlier supplier did the wrong design not considering low pressure.
The customer wanted a leak-proof seal even at very low pressure (around 1 bar).
We have given PTFE Multiple lip rod seal (one seal).
One working cycle includes four working media i.e. Steam, hot water, cold water, Nitrogen with varying pressure & temperature
Products offered: Variseal MC (Multi-Contact), material: T99 (specially formulated PTFE with self lubricants)
Benefits: PTFE offers very low friction, no stick-slip & absolutely no leakage due to multiple lips. Successfully running for more than the last one year. The earlier seal used to get failed within 3 months!