Overview
Intek® is a range of lightweight high performance thermal and acoustic insulation products. Intek®emits virtually no smoke of incapacitating toxic bi-products when exposed to open flames. Intek®is lightweight has a wide operating temperature range and can easily be removed for maintenance and then reused.
Intek® MTI-1046 Fiber Hull Board insulation is an incombustible, lightweight, semi-rigid board insulation made from felted glass fibers in a nominal density of 46.5 kg/m3. It has low organic content and was the first incombustible type hull board to be developed for use in the marine industry.
Intek® MTI-1046 provides additional cabin noise control, temperature control and fire resistance. The insulation has a smooth surface, and can be used in combination with waffle board and perforated glass cloth for fabricating Acoustic Absorptive Board.
Intek® MTI-1046 is highly effective in reducing heat transfer and the standard sizes available help save cutting and trimming time and reduce wastage.
Certificates*:
Intek® MTI-1046 Fiber Hull Board insulation is an incombustible, lightweight, semi-rigid board insulation made from felted glass fibers in a nominal density of 46.5 kg/m3. It has low organic content and was the first incombustible type hull board to be developed for use in the marine industry.
Intek® MTI-1046 provides additional cabin noise control, temperature control and fire resistance. The insulation has a smooth surface, and can be used in combination with waffle board and perforated glass cloth for fabricating Acoustic Absorptive Board.
Intek® MTI-1046 is highly effective in reducing heat transfer and the standard sizes available help save cutting and trimming time and reduce wastage.
Certificates*:
- Fully approved for MOD (UK) Ships
- Fully approved for MOD (UK) Ships
- Defense Standard 07-247 Smoke and Toxicity
- BS 476 Part 6 Fire Propagation
- BS 476 Part 7 Surface Spread of Flame
- ISO 4589 - 2 Oxygen Index
- U.S. Coast Guard Certificate of Approval
- MIL- 742F Type 1 and Type II
Classified as A1 by UK MOD, it can be used in unlimited quantities on specific vessels and platforms.
*Intek® MTI-1046 may meet additional specifications that are not listed here. Please contact us to determine if it meets your specifications or other requirements.
