Rieber Sewer seals are integrated into the pipe during the manufacturing process. It uses the mandrel together with the seal as a tool to form the pipe socket. This ensures that the seal always remains in the correct position in the join.
The seals are equally effective under both positive and negative pipe pressure (vacuum). Under positive pressure, the higher the pressure the greater the sealing force. Under vacuum, the seal maintains a positive sealing force against spigot and socket, preventing sand or soil to enter the joint.
The seal comprises a flexible rubber element to seal effectively against spigot and a treated metal insert which holds the seal firmly in place.
Time consuming measurement of pipe sockets and separate installation procedures are no longer necessary. At production, the number of extrusion lines that can be supervised by each operator is greater. This results in productivity increases for both pipe producer and pipe installer.
Key features & benefits
- Cannot be displaced or lost during stocking, transportation and installation
- Greater joint reliability, due to joint tolerance reduction
- Improved productivity and lower scrap rates
Material
- SBR rubber - Hardness 55 ± 5 Shore A
- Metal reinforcement
- Available in EPDM, Nitrile or other elastomeric material by special order
Größentabelle
| PIPE SIZE (mm) | A (mm) | B (mm) |
|---|---|---|
| 450 | 19 | 37.1 |
| 500 | 22.0 | 48.5 |
| 630 | 22.0 | 48.1 |
| 800 | 24.0 | 52.8 |
| PIPE SIZE (inch) | A (inch) | B (inch) |
| 4 | 0.378 | 0.724 |
| 5 | 0.402 | 0.770 |
| 6 | 0.425 | 0.815 |
| 8 | 0.472 | 0.906 |
| 10 | 0.58 | 1.087 |
| 12 | 0.614 | 1.177 |
| 15 | 0.616 | 1.358 |
| 18 | 0.712 | 1.539 |
| 21 | 0.786 | 1.720 |
| 24 | 0.863 | 1.902 |
| 27 | 0.945 | 2.083 |
Verbindungsherstellung
Muffe und Spitzende vor dem Verbinden auf Beschädigungen überprüfen.
Spitzende, Muffe und Dichtungsring müssen frei von Schmutz und anderen Fremdstoffen sein
Spitzende in einem Winkel von 15° anfasen
Gleitmittel gleichmäßig auf das Spitzende auftragen
Apply lubricant to the spigot end and bring it into contact with the socket.
