Curing Units

Trelleborg Curing Units

Turn up the heat and and reduce installation time

Exact positioning and careful liner installation are basic requirements for perfect results. This takes time you often don’t have with quick reacting resins.

Using our Trelleborg Resins with long pot times give you the time you need. They provide a stress-free working environment and enable you to achieve good-quality results. The somewhat longer installation time can be compensated by accelerating the curing process by hot water or steam.

Our epoxy resins are designed to have the best mechanical properties after curing with heat. We recommend steam-curing as this method saves energy, water and time and will enable you to reach the maximum mechanical properties of the cured liner. Furthermore it will allow you to carry out pipe rehabilitation quicker, more efficient and most cost-effective.

Trelleborg Steam Generators for CIPP Lining methods and MtH

Available in two versions:
50 kg/h, 150 kg/h steam production
(higher capacities on request)

Suitable for both house service pipes and vertical lines
Oil-fired steam generator types with a steam production of 50 kg/h, 150 kg/h respectively
Heat-up time approx. 10 minutes
Completely automatic working
Mixed manufacturing with water pipes and smoke pipes
Low maintenance - high efficiency:
90% output
Stainless steel frame
Insulated inside and coated with a stainless steel plate on the outside.
Supplied on wheels - two self-blocking.
Equipped with oil burner and external service tank

(The smoke outlet connector is at the backside)

Trelleborg Steam Generators for the LCR-B method

Available in two versions:
3 kg/h, 6 kg/h steam production

This small steam unit is the best solution if you want to speed up the curing time of built-in hat profiles or LCR liner, using the Trelleborg LCR method for lateral connection repair of underground house sewers and downpipes in buildings. It is easy to handle and suited for portable use.

Steam Gen 3: 230 V / 3.5 kW / steam production 3 kg/h
Steam Gen 6: 400 V / 6.0 kW / steam production 6 kg/h

Maximum Pressure: 6 bar

Overview Steam Generators

Types 200 - 800 on request with delivery times. Please contact us for more details

Technical Features		Trelleborg Steam Generator Types
Technical Features		Type Gen 50	Type Gen 150	Type Gen 200	Type Gen 300	Type Gen 400	Type Gen 500	Type Gen 600	Type Gen 700	Type Gen 800
Steam production	kg/h	50	150	200	300	400	500	600	700	800
Steam production	kW	50	150	200	300	400	500	600	700	800
Heat potential	kcal/h	29 000	90 000	120 000	180 000	240 000	300 000	360 000	420 000	480 000
Heat potential	kW	34	105	140	211	281	352	422	492	562
Pressure	bar	12	5	5	5	5	5	5	5	5
max. oil consumption	kg/h	3	9.5	13	19.6	20	32.6	42.8	45.7	52.1
Width (A)	mm	450	600	750	850	850	1400	1400	1400	1500
Height (B)	mm	1000	1300	1800	2000	2000	2000	2000	2000	2000
Depth (C)	mm	750	1100	2400	2400	2400	2700	2700	2700	3000
Weight	kg	300	370	700	880	900	950	1000	1050	1200
Chimney	Θ	120	120	160	160	200	250	300	300	300
Power supply	A	5	6	6	6	6	6	6	6	6
Operating Voltage	V / Hz	230 / 50	230 / 50	400 / 50	400 / 50	400 / 50	400 / 50	400 / 50	400 / 50	400 / 50
Max. water consumption	l/h	50	160	220	330	440	550	660	770	880
Heat-up time (approx.)	min	10	10	10	15	15	15	15	15	15
Steam Outlet	inch	1	1	1	2	2	2	2	2	2
Steam hose	mm	25	25	25	50	50	50	50	50	50