Webinar: Product Development Lifecycle Management: Optimizing Quality, Cost and Speed to Market
As medical device original equipment manufacturers look to bring innovative devices to market, the balance of cost, quality and speed is critical. It is more important than ever to find a partner that will help optimize design for manufacturability, delivering a fast development process that is ready for full scale-up and commercialization while never sacrificing quality.
This 60-minute webinar offers insight into:
- Ways to accelerate early-stage prototyping and development
- High-precision extrusion capabilities that solve unique challenges
- High-precision silicone and plastic-molded medical parts for critical devices
- A fully integrated solution for finished medical devices
Watch the webinar: https://event.webcasts.com/starthere.jsp?ei=1565249&tp_key=c1fc06f5ae
Rapid Development Center
Chris Tellers, Director, Rapid Development Center, Healthcare & Medical, Trelleborg
Chris Tellers serves as the Director of Trelleborg’s Rapid Development Center, Healthcare & Medical. He has more than 25 years of experience in rubber and silicone molding and has worked in many different departments in manufacturing, including tooling, automation, R&D, and IT. Chris is an expert in design for manufacturability and is a Certified SolidWorks Expert.
Dan Sanchez, Product Manager, Healthcare & Medical, Trelleborg
Dan Sanchez is a Product Manager, Healthcare & Medical at Trelleborg. He holds a bachelor’s degree in mechanical engineering from California Polytechnic State University, San Luis Obispo, and has worked in silicone manufacturing for the healthcare and medical industry since 1998. At Trelleborg, he helps medical device designers realize product concepts through engineered manufacturing solutions and design for manufacturability support.
Justin Strike, Product Manager, Healthcare & Medical, Trelleborg
Justin Strike is a mechanical engineer with a background in polymers and coatings, who currently serves Trelleborg as a Product Manager, Healthcare & Medical, specializing in injection molding. With nearly 25 years of industry experience, he helps medical device manufacturers solve some of the most complex molding challenges, accelerating time to market while ensuring a reliable product.
Robert Williams, Senior Project Engineer, Healthcare & Medical, Trelleborg
Robert Williams serves as a Senior Project Engineer, Healthcare & Medical, at Trelleborg. He has a degree in materials and process engineering from the University of Wisconsin, Stout, and started his career working with metals before transitioning to the plastics industry. Since 2005, he has focused on injection molding and assembly of medical products, ranging from prototypes to commercialized programs comprising tens of millions of parts annually.