TM600

Wheels

TM600

Trekkracht, zelfreiniging en slijtvastheid, samen met hoog laadvermogen en lage bodemverdichting zorgen voor de uistekende prestaties van deze reeks.

Trelleborg-Agricultural-Tires-TM600_200x281

De TM600 reeks combineert extreem lichtgewicht met een uitstekende kracht.
Het is een metrische en tubeless reeks,  ideaal voor middelgrote trekkers.

De vorm, geometrie, het aantal en de diepte van de nokken van de TM600 zijn zorgvuldig ontworpen om een hoge trekkracht te garanderen in alle bodemgomstandigheden.

De TM600 zorgt voor een gelijkmatige bodemindrukking, en hoog drijfvermogen, om te helpen om de verdichting te verminderen. Gevolg betere bodembescherming en vruchtbaarheid.
Om deze voordelen te behalen, werd het contactoppervlak in het midden van het loopvlak gereduceerd om de bodemdruk te minimaliseren.

Tegenwoordig worden trekkers steeds meer gebruikt op de weg, om zich snel te verplaatsen van het ene veld naar het andere, vaak geladen met werktuigen of met aanhangwagen.
In de loop der jaren heeft de TM600 niet alleen geweldige prestaties bewezen  in het veld, maar ook op de weg. Door te  zorgen voor een hoog comfort gedurende de volledige levensduur van de band.
afbeelding TM600

Downloads

TM600

Reliability at first sight  

Downloaden (pdf)

Visual Folder

Trelleborg Wheel Systems. Banden en complete wielen.  

Downloaden (pdf)

DUO 500 Dual Monting System

Dual mounting system snstallation instructions  

Downloaden (pdf)

Pressure Table

Gegevens Belasting Bandenspanningen  

Downloaden (pdf)

Mobile Tools and Apps

Trelleborg Apps. N°1 voor uw productiviteit  

Downloaden (pdf)

THK Trelleborg High Knurling

Trelleborg High Knurling The perfect match  

Downloaden (pdf)

Technische data

Beschrijving van de band Sectiebreedte Buitendiameter Afrolomtrek Radius bij statische lading Index radius snelheid Velg Aanbevolen velgen Nominale spanning Profieltype Type Binnenband Vervanging Spanningstabel

210/95R16 
106 A8 (B)

210

800

2415

363

390

W7

W6, 5.50F

2,4

R-1W

Tubeless

+

Spanningstabel

Speed 1 bar (14 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 2.0 bar (29 PSI) 2.4 bar (35 PSI) 2.8 bar (41 PSI) 2.9 bar (42 PSI) 3.0 bar (43 PSI)
50 S 590 665 745 820 895 950
40 S 590 665 745 820 895 950
30 S 635 715 800 880 960 1020
10 LT S 805 905 1015 1120 1220 1295 1400 1425 1450
10 HT S 635 715 800 880 960 1020

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

210/95R18 
108 A8 (B)

210

855

2555

391

410

W7

W6, 5.50F

2,4

R-1W

Tubeless

+

Spanningstabel

Speed 1 bar (14 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 2.0 bar (29 PSI) 2.4 bar (35 PSI) 2.8 bar (41 PSI) 2.9 bar (42 PSI) 3.0 bar (43 PSI)
50 S 620 700 780 860 940 1000
40 S 620 700 780 860 940 1000
30 S 665 750 835 925 1010 1070
10 LT S 845 955 1065 1170 1280 1360 1470 1500 1525
10 HT S 665 750 835 925 1010 1070

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

250/85R24 
112 A8 (109B)

245

1035

3115

465

500

W8

W7; W9

2,0

R-1W

Tubeless

9.5R24 TR218

9.5R24

+

Spanningstabel

Speed 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 2 bar (29 PSI) 2.2 bar (32 PSI) 2.4 bar (35 PSI) 2.6 bar (38 PSI)
50 S 510 585 675 760 845 935 1030
40 S 560 645 740 835 930 1025 1120
30 S 600 690 790 895 995 1100 1200
10 LT S 760 870 1000 1125 1255 1385 1515 1605 1680 1905
10 HT S 600 690 790 895 995 1100 1200

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

280/85R20 
112 A8 (109B)

295

985

2955

450

475

W10

W9; W8; DW10

1,6

R1W

Tubeless

11.2-20 TR-218

(11.2R20)

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 5000 680 750 815 885 955 1030
40 S 745 820 895 970 1045 1120
30 S 800 880 960 1040 1120 1200
10 HT S 800 880 960 1040 1120 1200
50 s 5000 680 750 815 885 955 1030
10 LT S 895 1000 1105 1210 1315 1420 1525 1630 1680 1905

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

280/85R24 
115 A8 (112B)

292

1086

3276

494

525

W10

W9; W8; DW10

1,6

R1W

Tubeless

11.2-24 TR218

11.2R24

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 740 815 890 965 1035 1120
40 S 810 895 975 1055 1135 1215
30 S 870 960 1045 1130 1215 1305
10 HT S 870 960 1045 1130 1215 1305
10 LT S 980 1095 1210 1325 1440 1550 1660 1770 1825 2070

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

280/85R28 
118 A8 (115B)

292

1187

3580

542

575

W10

W9; DW10

1,6

R1W

Tubeless

11.2-28 TR218 - 12.4-28 TR218

11.2R28

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 795 875 960 1040 1120 1215
40 S 870 960 1050 1140 1230 1320
30 S 935 1030 1125 1220 1320 1415
10 HT S 935 1030 1125 1220 1320 1415
10 LT S 1065 1190 1315 1440 1560 1680 1800 1920 1980 2245

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

320/85R20 
119 A8 (116B)

329

1052

3160

470

500

W11

W10; W9; DW11

1,6

R1W

Tubeless

11.2-20 TR218

12.4R20

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 825 910 995 1075 1160 1250
40 S 905 1000 1090 1180 1270 1360
30 S 970 1070 1170 1265 1360 1460
10 HT S 970 1070 1170 1265 1360 1460
10 LT S 1105 1230 1355 1480 1605 1730 1855 1980 2040 2315

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

320/85R24 
122 A8 (119B)

329

1154

3465

515

550

W11

W10; W9; DW10; DW11

1,6

R1W

Tubeless

12.4-24 TR218 - 13.6-24 TR218

12.4R24

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 910 1005 1095 1185 1275 1360
40 S 1000 1100 1200 1300 1400 1500
30 S 1070 1180 1285 1395 1500 1605
10 HT S 1070 1180 1285 1395 1500 1605
10 LT S 1200 1340 1480 1620 1760 1900 2040 2180 2250 2550

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

320/85R28 
124 A8 (121B)

329

1255

3796

566

600

W11

W10; W9; DW10; DW11

1,6

R1W

Tubeless

12.4-28 TR218

12.4R28

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 960 1060 1160 1260 1360 1450
40 S 1050 1160 1270 1380 1490 1600
30 S 1125 1245 1360 1480 1595 1715
10 HT S 1125 1245 1360 1480 1595 1715
10 LT S 1275 1425 1575 1725 1875 2025 2175 2325 2400 2720

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

320/85R38 
129 A8 (126B)

325

1520

4605

690

725

W11

W10; W9; DW10; DW11

1,6

R1W

Tubeless

12.4-38 TR218 - 16.9-38 TR218

12.4R38

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1105 1220 1340 1455 1570 1700
40 S 1215 1340 1470 1595 1725 1850
30 S 1300 1435 1570 1710 1845 1980
10 HT S 1300 1435 1570 1710 1845 1980
10 LT S 1660 1650 1825 1995 2170 2345 2515 2690 2775 3145

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

340/85R24 
125 A8 (122B)

353

1188

3547

540

575

W12

W11; DW11; DW12

1,6

R1W

Tubeless

13.6-24 TR218 - 14.9-24 TR218

13.6R24

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1000 1105 1205 1305 1405 1500
40 S 1095 1210 1320 1430 1540 1650
30 S 1175 1295 1415 1535 1650 1770
10 HT S 1175 1295 1415 1535 1650 1770
10 LT S 1320 1475 1630 1785 1940 2095 2250 2400 2475 2805

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

340/85R38 
133 A8 (130B)

353

1543

4665

710

750

W12

W11; DW11; DW12

1,6

R1W

Tubeless

13.6-38 TR218 - 16.9-38 TR218

13.6R38

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1240 1365 1495 1620 1750 1900
40 S 1360 1500 1640 1780 1920 2060
30 S 1460 1605 1755 1905 2055 2205
10 HT S 1460 1605 1755 1905 2055 2205
10 LT S 1660 1855 2045 2235 2425 2615 2805 2995 3090 3505

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

380/80R38 
142 A8 (142B)

375

1575

4765

724

750

W12

W11;W13;DW11;DW12;DW13

2,4

R1W

Tubeless

14.9-38 TR218 - 16.9-38 TR218

+

Spanningstabel

Speed 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 2.0 bar (29 PSI) 2.4 bar (35 PSI) 2.8 bar (41 PSI) 2.9 bar (42 PSI) 3.0 bar (44 PSI)
50 S 1250 1435 1645 1855 2070 2280 2465 2650
40 S 1250 1435 1645 1855 2070 2280 2465 2650
30 S 1335 1535 1760 1985 2215 2440 2640 2840
10 LT S 1680 1930 2215 2500 2785 3070 3320 3570 3895 3975 4505
10 HT S 1335 1535 1760 1985 2215 2440 2640 2840

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

380/85R24 
131 A8 (128B)

390

1256

3750

560

600

W13

W12; W11; DW11; DW12;DW13

1,6

R1W

Tubeless

14.9-24 TR218 - 16.9-24 TR218

14.9R24

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1170 1295 1420 1540 1660 1800
40 S 1285 1420 1555 1690 1820 1950
30 S 1375 1520 1665 1810 1950 2090
10 HT S 1375 1520 1665 1810 1950 2090
10 LT S 1575 1755 1935 2115 2295 2475 2655 2835 2925 3315

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

380/85R28 
133 A8 (130B)

390

1357

4085

615

650

W13

W12; W11; DW11; DW12; DW13

1,6

R1W

Tubeless

14.9-28 TR218 - 16.9-28 TR218

14.9R28

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1240 1365 1495 1620 1750 1900
40 S 1360 1500 1640 1780 1920 2060
30 S 1460 1605 1755 1905 2055 2205
10 HT S 1460 1605 1755 1905 2055 2205
10 LT S 1660 1855 2045 2235 2425 2615 2805 2995 3090 3505

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

380/85R30 
135 A8 (132B)

390

1408

4238

635

675

W13

W12; W11; DW11; DW12; DW13

1,6

R1W

Tubeless

14.9-30 TR218

14.9R30

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1305 1440 1575 1715 1850 2000
40 S 1430 1580 1730 1880 2030 2180
30 S 1535 1695 1855 2015 2175 2335
10 HT S 1535 1695 1855 2015 2175 2335
10 LT S 1745 1950 2155 2360 2565 2770 2970 3170 3270 3710

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

380/85R34 
137 A8 (137B)

390

1513

4574

683

725

W12

W13

1,6

R1W

Tubeless

16.9-34 TR218

14.9R34

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1515 1670 1830 1990 2145 2300
40 S 1515 1670 1830 1990 2145 2300
30 S 1620 1790 1960 2130 2295 2465
10 HT S 1620 1790 1960 2130 2295 2465
10 LT S 1850 2060 2275 2490 2705 2920 3130 3345 3450 3910

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

380/85R38 
144 A8 (144B)

400

1610

4900

730

775

W13

W11; W12: DW11; DW12;DW13

2,4

R1W

Tubeless

16,9-38TR218

14.9R38

+

Spanningstabel

Speed 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 2.0 bar (29 PSI) 2.4 bar (35 PSI) 2.8 bar (41 PSI) 2.9 bar (42 PSI) 3.0 bar (44 PSI)
50 S 1320 1515 1740 1960 2185 2410 2605 2800
40 S 1320 1515 1740 1960 2185 2410 2605 2800
30 S 1410 1620 1860 2100 2340 2580 2790 3000
10 LT S 1775 2040 2340 2645 2945 3245 3510 3775 4115 4200 4760
10 HT S 1410 1620 1860 2100 2340 2580 2790 3000

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

380/95R38 
147 A8 (B)

390

1674

5020

762

800

W12

W13

2,4

R1-W

Tubeless

+

Spanningstabel

Speed 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (14 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 2.0 bar (29 PSI) 2.4 bar (35 PSI) 2.8 bar (41 PSI) 2.9 bar (42 PSI) 3.0 bar (43 PSI)
50 S 1450 1665 1910 2155 2400 2645 2895 3075
40 S 1450 1665 1910 2155 2400 2645 2895 3075
30 S 1555 1785 2045 2310 2570 2835 3100 3295
10 LT S 1960 2250 2580 2910 3240 3575 3910 4155 4525 4675 5235
10 HT S 1555 1785 2045 2310 2570 2835 3100 3295

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

400/75R38 
138 A8 (135B)

395

1565

4670

707

750

DW14L

W14L

1,6

R-1W

Tubeless

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1435 1585 1735 1885 2035 2180
40 S 1555 1715 1880 2040 2200 2360
30 S 1660 1835 2010 2185 2355 2530
10 LT S 1895 2110 2335 2555 2775 2995 3210 3430 3540 4015
10 HT S 1660 1835 2010 2185 2355 2530

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

420/85R24 
137 A8 (134B)

438

1324

3970

590

625

W15L

W14L; DW14L; DW15L

1,6

R1W

Tubeless

16.9-24 TR218

16.9R24

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1385 1530 1670 1815 1955 2120
40 S 1520 1680 1835 1990 2145 2300
30 S 1630 1800 1965 2130 2300 2465
10 HT S 1630 1800 1965 2130 2300 2465
10 LT S 1840 2055 2270 2485 2700 2915 3130 3345 3450 3910

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

420/85R30 
140 A8 (137B)

438

1475

4455

660

700

W15L

W14L; DW14L; DW15L

1,6

R1W

Tubeless

16.9-30 TR218 - 18.4-30 TR218

16.9R30

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1505 1660 1815 1970 2125 2300
40 S 1650 1820 1990 2160 2330 2500
30 S 1770 1950 2130 2315 2495 2675
10 HT S 1770 1950 2130 2315 2495 2675
10 LT S 2000 2235 2470 2705 2940 3175 3405 3635 3750 4250

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

420/85R28 
139 A8 (136B)

438

1425

4290

635

675

W15L

W14L; DW14L; DW15L

1,6

R1W

Tubeless

16.9-28 TR218

16.9R28

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1465 1615 1765 1915 2065 2240
40 S 1605 1770 1935 2100 2265 2430
30 S 1720 1895 2075 2250 2425 2605
10 HT S 1720 1895 2075 2250 2425 2605
10 LT S 1955 2185 2410 2635 2860 3085 3310 3535 3645 4135

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

420/85R38 
144 A8 (141B)

438

1679

5060

760

800

W15L

W14L; DW14L; DW15L

1,6

R1W

Tubeless

16.9-38 TR218

16.9R38

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1685 1860 2030 2205 2380 2575
40 S 1850 2040 2230 2420 2610 2800
30 S 1980 2185 2390 2590 2795 3000
10 HT S 1980 2185 2390 2590 2795 3000
10 LT S 2250 2510 2770 3030 3290 3550 3810 4070 4200 4760

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

460/85R30 
145 A8 (142B)

475

1544

4678

691

725

W16L

W15L; DW15L; DW16L

1,6

R1W

Tubeless

18.4-30 TR218

18.4R30

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1730 1915 2095 2275 2460 2650
40 S 1900 2100 2300 2500 2700 2900
30 S 2035 2250 2465 2675 2890 3105
10 HT S 2035 2250 2465 2675 2890 3105
10 LT S 2325 2595 2865 3135 3405 3675 3945 4215 4350 4930

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

460/85R34 
147 A8 (144B)

475

1646

4945

745

775

W16L

W15L; DW15L; DW16L

1,6

R1W

Tubeless

18.4-34 TR218 - 16.9-34 TR218

18.4R34

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1845 2035 2225 2420 2610 2800
40 S 2025 2235 2445 2655 2865 3075
30 S 2170 2395 2620 2845 3070 3295
10 HT S 2170 2395 2620 2845 3070 3295
10 LT S 2465 2755 3045 3335 3620 3905 4190 4475 4615 5230

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

460/85R38 
149 A8 (146B)

475

1747

5260

800

825

W16L

W15L; DW15L; DW16L

1,6

R1W

Tubeless

18.4-38 TR218

18.4R38

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 1950 2155 2360 2560 2760 3000
40 S 2140 2365 2590 2810 3030 3250
30 S 2290 2535 2775 3010 3245 3480
10 HT S 2290 2535 2775 3010 3245 3480
10 LT S 2595 2900 3205 3510 3815 4120 4425 4725 4875 5525

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

480/80R38 
149 A8 (149B)

495

1760

5235

786

825

W16A

W15, DW15, DW16

1,6

R1W

Tubeless

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (14 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 2140 2365 2590 2810 3030 3250
40 S 2140 2365 2590 2810 3030 3250
30 S 2290 2535 2775 3010 3245 3480
10 LT S 2595 2900 3205 3510 3815 4120 4425 4725 4875 5525
10 HT S 2290 2535 2775 3010 3245 3480

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

480/80R42 
151 A8 (151B)

495

1850

5550

833

875

W16A

DD16 - DW16B - DW16L

1,6

R1W

Tubeless

18.4-42 TR218 - 20.8-42 TR218

18.4R42

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 2270 2505 2745 2985 3220 3450
40 S 2270 2505 2745 2985 3220 3450
30 S 2430 2685 2940 3195 3445 3695
10 HT S 2430 2685 2940 3195 3445 3695
10 LT S 2770 3085 3410 3735 4060 4375 4695 5015 5175 5865

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

480/80R46 
158 A8 (158B)

495

1964

5950

887

925

W16A

DD16 - DW16B

2,4

R1W

Tubeless

18.4R46

+

Spanningstabel

Speed 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 2.0 bar (29 PSI) 2.4 bar (35 PSI) 2.8 bar (41 PSI) 2.9 bar (42 PSI) 3.0 bar (44 PSI)
50 S 2000 2295 2635 2975 3315 3655 3995 4250
40 S 2000 2295 2635 2975 3315 3655 3995 4250
30 S 2140 2460 2820 3185 3550 3915 4275 4550
10 LT S 2720 3125 3585 4050 4510 4975 5435 5740 6260 6390 7240
10 HT S 2140 2460 2820 3185 3550 3915 4275 4550

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

480/80R50 
159 D

500

2045

6190

935

975

DW15B

DW16B

2,4

R1W

Tubeless

18.4R50

+

Spanningstabel

Speed 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (15bar PSI) 1.4 bar (17 PSI) 1.6 bar (20 PSI) 2.0 bar (23 PSI) 2.4 bar (29 PSI) 2.8 bar (35 PSI) 2.9 bar (41 PSI) 3.0 bar (42 PSI)
65 S 2715 3065 3415 3765 4115 4375
50 S 2160 2485 2850 3220 3585 3955 4320 4595
40 S 2255 2590 2975 3355 3740 4120 4505 4375
30 S 2365 2720 3120 3525 3655 4030 4730 5035
10 LT S 2800 3215 3690 4165 4645 5120 5595 5950 6370 6565 7440
10 HT S 2365 2720 3120 3525 3925 4330 4730 5035

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

480/95R50 
164 A8 (164B)

500

2148

6490

982

1075

DW16B

DW16A, DW15A, DW15B

2,4

R1-W

Tubeless

+

Spanningstabel

Speed 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (14 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 2.0 bar (29 PSI) 2.4 bar (35 PSI) 2.8 bar (41 PSI) 2.9 bar (42 PSI) 3.0 bar (43 PSI)
50 S 2350 2700 3100 3500 3900 4300 4700 5000
40 S 2350 2700 3100 3500 3900 4300 4700 5000
30 S 2515 2890 3320 3745 4175 4605 5030 5350
10 LT S 3175 3645 4185 4725 5265 5805 6345 6750 7360 7595 8505
10 HT S 2515 2890 3320 3745 4175 4605 5030 5350

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

520/85R38 
155 A8 (152B)

536

1849

5510

825

875

DW18L

W16L; W18L; DW16L

1,6

R1W

Tubeless

20.8-38 TR218

20.8R38

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 2325 2565 2805 3045 3290 3550
40 S 2550 2815 3080 3345 3610 3875
30 S 2730 3015 3300 3580 3865 4150
10 HT S 2730 3015 3300 3580 3865 4150
10 LT S 3105 3470 3835 4195 4555 4915 5275 5635 5815 6590

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

520/85R42 
157 A8 (157B)

536

1952

5867

881

925

DW18L

W16L; W18L; DW16L

1,6

R1W

Tubeless

20.8-42 TR218

20.8R42

+

Spanningstabel

Speed 0.4 bar (6 PSI) 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17 PSI) 1.4 bar (20 PSI) 1.6 bar (23 PSI) 1.8 bar (26 PSI) 1.9 bar (28 PSI) 2.1 bar (30 PSI)
50 S 2710 2995 3280 3565 3845 4125
40 S 2710 2995 3280 3565 3845 4125
30 S 2900 3205 3510 3815 4115 4415
10 HT S 2900 3205 3510 3815 4115 4415
10 LT S 3305 3690 4075 4460 4845 5230 5615 6000 6190 7015

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

520/85R46 
158 A8 (158B)

535

2045

6160

905

975

DW16L

W16L; W18L; DW16L; DD16L; DD18L

1,6

R1W

Tubeless

20.8R46

+

Spanningstabel

Speed 0.6 bar (9 PSI) 0.8 bar (12 PSI) 1.0 bar (15 PSI) 1.2 bar (17bar PSI) 1.4 bar (17 PSI) 1.6 bar (20 PSI) 1.8 bar (23 PSI) 1.9 bar (26 PSI) 2.1 bar (28 PSI)
50 S 2765 3055 3345 3630 3910 4250
40 S 2765 3055 3345 3630 3910 4250
30 S 2960 3270 3580 3885 4185 4550
10 LT S 3760 4155 4550 4935 5320 5780 6180 6375 7225
10 HT S 2960 3270 3580 3885 4185 4550

Nota's

SW= On the nominal RIM. (Not referred to the PERMITTED RIMS)
50/40/30= On road transport at 50/40/30 Km/h. For intensive road transport at 40 and 50 Km/h the pressure should be increased by 0,4 bar.
10 LT= Maximum Speed 10 Km/h. Surface treatment with low torque value.
10 HT= Maximum Speed 10 Km/h. Field application with high torque value.
S= Single fitment
H (*)= Maximum speed 10 Km/h. Harvesting machines in cyclic loading service and farm to field transit.
SRI= Speed Radius Index - value to be used for calculation of the theoretical tractor speed during European Union homologation and for the interchangeability of different tyre sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
IMPORTANT: The inflation pressure is established considering the application and the load for each tyre.

Web Applicaties

Tire Book web versie

Vind alle technische informatie over het Trelleborg gamma en nuttig advies om het maximum uit uw banden te halen.

De app is ook in de online-versie beschikbaar

Tire iBrochure web versie

Vind alle brochures over het Trelleborg gamma, en nuttig advies om het maximum uit uw banden te halen. Geniet van de nieuwste foto's, filmpjes en geanimeerde testresultaten over Trelleborg producten en oplossingen

De versie voor pc is geoptimaliseerd voor Google Chrome, IE10 en latere versies.

Tire Efficiency Web versie

De Trelleborg Tire Efficiency app helpt u om de voordelen van Trelleborg banden, zowel op gebied van kosten- als tijdsbesparing te meten.

Dealer Locator web versie

Met de Trelleborg Dealer Locator App kunt u uw dichtstbijzijnde Trelleborg  dealer vinden. Met behulp van de Google Maps-technologie toont de app de kortste weg naar de dealer, en geeft u de meest relevante contactgegevens (adres, telefoonnummer, e-mail en website) om deze te bereiken.

Load Calculator

Gratis offline applicatie

Download offline applicatie

Gratis online applicatie

Ga naar de online applicatie

Middelen

Technische gegevens

Digitale Tools

Produkt brochures

Video

Nieuw Product

TM3000

Maximaliseert het laadvermogen van de band bij lage bandenspanning

TM150

VF staat toe om  40% meer gewicht te dragen bij dezelfde bandenspanning

TM700 ProgressiveTraction

De grip wordt versterkt door een tweede ankerpunt

TH400

Grote stabiliteit en wendbaarheid

TM1060

Trelleborg head lug family look secures long life 

Twin Forestry T440

Exclusief nieuw profiel voor een uitstekende zelf-reiniging en trekkracht op alle terrein.

Contacteer ons

Vraag het aan onze experts. Wij helpen u graag om de juiste oplossing voor uw bedrijf te vinden.

*
*
*
*
*
*
*
Door dit formulier te verzenden, bent u zich ervan bewust dat we de door u verstrekte persoonsgegevens verwerken om op uw verzoek te kunnen ingaan. De wettelijke basis voor onze verwerking van uw persoonsgegevens bestaat erin dat deze noodzakelijk is om te kunnen voldoen aan ons legitiem belang om u de mogelijkheid te bieden u in of uit te schrijven en/of om u de gevraagde informatie te bezorgen. Voor meer details dient u onze privacyverklaring te lezen.
Sending message, please hold on.
We're sorry, there was an error trying to send your message. Please try again.
Wij gebruiken cookies om u te voorzien van een betere service. Ga verder op onze website als u hiermee akkoord gaat, of ontdek hoe u  cookies kunt beheren of lees onze Privacyverklaring. .
Ok