Forsheda 607 PIP-Lock is a composite seal consisting of:
The seal becomes part of the socket forming tool used to shape its own seal groove reducing irregularities and tolerances in the socket.
The F-607 PIP-Lock seal should meets or exceeds current American standards for wastewater lines both for indoor and underground.
Furthermore the seal design gives low assembly forces making pipe jointing easier.
The PIP-Lock seal is made from two materials. For dimensions 6in to 10in the sealing element is TPV and the plastic retaining element is polypropylene.
The TPV material meets the American standard ASTM F-477.
Detailed material specification is available on request.
Integrated sealing system for plastic pipes for indoor, irrigation and underground wastewater applications
100 % leak-free
Examples of Sizes
|Please conctact Trelleborg Pipe Seals for technical advice and joint design recommendations to meet your performance requirements|
All data in inches.
On each seal, profile thickness, outer diameter, recommended pipe measurement and production period are given. The corresponding data are also on the packaging.
Subject to change for technical reasons
The spigot and socket of the pipe should be checked for damage prior to jointing.
The pipe spigot should be chamfered with an angle of 15°, taking care to remove all burrs.
Both spigot and socket including the sealing ring should be free from dirt and other foreign matter.
Lubricant should be applied evenly to the spigot end of the pipe.
Immediately after lubrication, the spigot should be brought into contact with the socket.
Both spigot and socket should correctly aligned and then slide the spigot into the socket, thus compressing the seal until the joint is fully made.
Technical Approvals, Patents, Quality Standards
How can we be of assistance? Please fill in the form to request for more information