After Sales Service
Trelleborg Marine Systems can assist in providing inspections/Maintenance for fender systems and the intervals and subsequent repair procedures can vary greatly depending on:
-
Local climate
-
System type and frequency of usage
-
Type and range of vessels using the berth
-
Local resources and equipment
-
Initial system design
Inspections/Maintenance of following items are focused on providing the maximum life cycle for the system installed. Inspection intervals should be adjusted to suit local conditions and feedback from maintenance personnel. The following Inspection / Maintenance schedule can serve as a guideline for Trelleborg Marine Systems fenders:
|
|
|
|
| Rubber fender |
Visual check
Close examination |
Every 12 months
After 15 years |
| UHMW-PE facings |
Visual check
Close examination |
Every 12 months
After 10 years |
| Steelwork and panel |
Visual check
Close examination |
Every 12 months
After 15 years |
| Paint systems |
Visual check
Close examination |
Every 12 months
After 10 years |
| Bolts and fasteners |
Visual check
Close examination |
Every 12 months
After 5 years |
| Chains and shackles |
Visual check
Close examination |
Every 12 months
After 5 years |
| Bearings (PMF) |
Visual check
Close examination |
Every 12 months
After 15 years |
| Lubrications (PMF) |
Re-charge system |
Every 6 months |
Please contact us for a proposal for your Port operation
E-mail
