Home / Technical Data / Tooling Block

Trelleborg Emerson & Cuming, Inc.
290 Forbes Boulevard
Mansfield, MA 02048-1817
USA
Tel: +1 774 719 1400
Fax: +1 774 719 1410

Technical Data

Tooling Block

TB650 Epoxy syntactic for use as high quality tooling block
Property	Test Method	Value	SI Units	Value	Imperial Units
Color		Green
Density	BS EN ISO 1183-3: 1999	680	kg/m³	43	lb/ft³
Shore Hardness	ISO 868: 1998	69	°D	69	°D
Uniaxial Compressive Strength	BS EN ISO 604	45.5	MPa	6600	lbf/in²
Uniaxial Compressive Modulus	BS EN ISO 604	1490	MPa	216100	lbf/in²
Heat Distortion Temperature	BS 2782	111	°C	232	°F
Coefficient of Thermal Expansion	BS 4618 3.1	38.0	x10^-6/°C	21.2	x 10^-6/°F

TB620 Epoxy syntactic for use as a cost effective tooling block
Property	Test Method	Value	SI Units	Value	Imperial Units
Color		Blue
Density	BS EN ISO 1183-3: 1999	620	kg/m³	39	lb/ft³
Shore Hardness	ISO 868: 1998	69	°D	69	°D
Uniaxial Compressive Strength	BS EN ISO 604	38.0	MPa	5510	lbf/in²
Uniaxial Compressive Modulus	BS EN ISO 604	1200	MPa	174000	lbf/in²
Heat Distortion Temperature	BS 2782	110	°C	230	°F
Coeeficient of Thermal Expansion	BS 4618 3.1	39.0	x10^-6/°C	21.7	x 10^-6/°F

SB610 Epoxy Syntactic for high quality tooling block (high Tg)
Property	Test Method	Value	SI Units	Value	Imperial Units
Color		Blue
Density	BS EN ISO 1183-3: 1999	623	kg/m³	39	lb/ft³
Shore Hardness	ISO 868: 1998	69	°D	69	°D
Uniaxial Compressive Strength	BS EN ISO 604	40.0	MPa	5800	lbf/in²
Glass Transition Temperature	BS EN ISO 604	158	°C	316	°F
Coefficient of Thermal Expansion	BS 4618 3.1	28.2	x10^-6/°C	15.7	x 10^-6/°F

EP678 Epoxy syntactic for use as high quality tooling block
Property	Test Method	Value	SI Units	Value	Imperial Units
Color		Blue
Density	BS EN ISO 1183-3: 1999	708	kg/m³	44	lb/ft³
Uniaxial Compressive Strength	BS EN ISO 604	52.0	MPa	7540	lbf/in²
Heat Distortion Temperature	BS 2782	119	°C	246	°F
Coefficient of Thermal Expansion	BS 4618 3.1	35.7	x10^-6/°C	19.9	x 10^-6/°F

EP671 Epoxy syntactic for use as a cost effective tooling block
Property	Test Method	Value	SI Units	Value	Imperial Units
Color		Tan
Density	BS EN ISO 1183-3: 1999	609	kg/m³	38	lb/ft³
Shore Hardness	ISO 868: 1998	59	°D	59	°D
Uniaxial Compressive Strength	BS EN ISO 604	25.8	MPa	3740	lbf/in²
Heat Distortion Temperature	BS 2782	63	°C	145	°F
Coefficient of Thermal Expansion	BS 4618 3.1	60.3	x10^-6/°C	33.6	x 10^-6/°F

EP650 Epoxy syntactic for high quality tooling block (high Tg)
Property	Test Method	Value	SI Units	Value	Imperial Units
Colour		Brown
Density	BS EN ISO 1183-3: 1999	684	kg/m³	43	lb/ft³
Shore Hardness	ISO 868: 1998	67	°D	67	°D
Uniaxial Compressive Strength	BS EN ISO 604	40.6	MPa	5890	lbf/in²
Heat Distortion Temperature	BS 2782	123	°C	253	°F
Coefficient of Thermal Expansion	BS 4618 3.1	42.0	x10^-6/°C	23.4	x 10^-6/°F

Last updated 2007-11-06 |

E-mail this page

E-mail this pagex

Receiver e-mail address

Your e-mail address

Subject

Your message