Home / Technical Data / Adhesives, Sealers and Pastes

Trelleborg CRP Ltd
AEM Product Group
Stanley Way,
Stanley,
Skelmersdale,
Lancashire,
WN8 8EA
England

Tel: +44 (0) 1695 712000
Fax: +44 (0) 1695 712111

Trelleborg Emerson & Cuming, Inc.
AEM Product Group
290 Forbes Boulevard,
Mansfield, MA,
02048-1817
USA

Tel: +1 774 719 1400
Fax: +1 774 719 1410

Technical Data

Adhesives, Sealers and Pastes

Adhesives
	EP551	EP578	EP574
Mixed Viscosity at 25°C / 77°F (cP)	1800	10000	700
Pot Life at 25°C / 77°F (Mins)	30	75	20
Thin Film Gel at 25°C / 77°F (hours)	3-5	4	2-4
Mix ratio by weight	100A:14B	100A:20B	100A:25B
Colour	Clear	Blue	Amber/Red
Astm D - 2240 Shore D Hardness	88	68	82
Astm D - 792 Specific Gravity	1.15	0.65	1.15
CTE m/m/°C in/in/°F	4.8 x 10 -5 2.7 x 10 -5	32.4 x 10 -5 18 x 10 -5	6.3 x 10 -5 3.5 x 10 -5
Comments	Clear unfilled adhesive for use with complete range	Density matched blue adhesive for use with EP678 TB610 & TB620	Adhesive for thin bond lines

Sealers
	EP692
Mixed Viscosity at 25°C / 77°F (cP)	3000
Pot Life at 25°C / 77°F (Mins)	25
Thin Film Gel at 25°C / 77°F (hours)	3-5
Mix ratio by weight	100A:15B
Colour	Clear
Astm D - 2240 Shore D Hardness	87
Astm D - 792 Specific Gravity	1.20
CTE m/m/°C in/in/°F	5.0 x 10 -5 2.8 x 10 -5
Comments	Sealer compatible with whole range

Patch paste & repair systems
	EP651	EP652	EP646	EP679
Mixed Viscosity at 25°C / 77°F (cP)	3400	Paste	3000	Paste
Pot Life at 25°C / 77°F (Mins)	30	30	20	10
Thin Film Gel at 25°C / 77°F (hours)	3.5	n/a	4	15 mins
Mix ratio by weight	100A:10B	n/a	100A:14B	100A:21B
Colour	Brown	Reddish/Brown	Orange	Blue
Astm D - 2240 Shore D Hardness	74	75-80	n/a	68
Astm D - 792 Specific Gravity	1.094	n/a	n/a	0.65
CTE m/m/°C in/in/°F	n/a	n/a	n/a	3.2 x 10 -5 1.8 x 10 -5
Comments	Density matched brown adhesive for use with EP650 & TB650	Brown patch paste	Filled patch system or EP671 board	Blue patch paste

Last updated 2008-04-02 |

Print this page |

E-mail this page

E-mail this pagex

Receiver e-mail address

Your e-mail address

Subject

Your message